home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Night Owl 6
/
Night Owl's Shareware - PDSI-006 - Night Owl Corp (1990).iso
/
034a
/
echo305.zip
/
ECHODOR.CTL
< prev
next >
Wrap
Text File
|
1990-06-14
|
13KB
|
303 lines
;Echodor.art
;
;Parameter file and area table for the message reader
;
;
;Parameters follow below.
;
; ZONE - The zone number of your system
; this is only used for generations of the net/node
; number placed at the end of the ORIGIN lines
;
; NET - The net address of your system
;
; NODE - The node number of your system
;
; POINT - The point number of your system. If you don't
; run a point system set this to zero. This is
; only used to generate the net/node number placed
; at the end of the ORIGIN lines.
;
ZONE 1
NET 116
NODE 1000
POINT 0
;
; Change this line to your origin line as it appears
; in your areas.bbs file to include an " ' " in your
; origin line use " '' ".
;
; To get:
; Star Land's BBS
;
; You Enter the origin as:
; 'Star Land''s BBS'
;
; Also, don't include your net/node number at the end of
; the ORIGIN line. EchoDor will automatically append a
; space followed by the NET/NODE number in the form:
;
; (1:116/1000.0)
;
ORIGIN 'The NEW WorkBench BBS - 615-333-1458 -'
; The above will appear as:
; * ORIGIN: The NEW WorkBench BBS - 615-333-1458 - (1:116/1000.0)
;
; OUTBOUND - This is your outbound file directory
OUTBOUND G:\BINKLEY\OUTBOUND
;
; set this parameter to limit the maximum minutes
; allowed per session
MAXUSERTIME 45
;
; This is the command string that will be displayed
; at the bottom of the main menu.
COMMANDSTRING 'Main Command ? '
;
; Uncomment the mono command if you are using a monochrome system
; and still wish for your users to see ansi color.
;MONO
;
;Ansi screen colors:
;
;Prompctolor - color set for all prompts
;MsgTextColor - Color set when displaying/entering message text
;HilightColor - Hilight color, should be the same as the "prompt answer color"
; of the config menu of the door for best results. It is set
; when entering text at the prompts.
;
;ScanBarColor - Set on the top bar of the scan command (Msg#.....From....To...)
;ScanLinecolor - Set on each line displayed with scan
;Defaultfore - color set everything else
;
PROMPTCOLOR 10
MSGTEXTCOLOR 14
HILIGHTCOLOR 15
SCANBARCOLOR 14
SCANLINECOLOR 13
DEFAULTFORE 11
;
; This is the 7 letter file name (without extension!)
; for the main menu files. This is what is displayed to
; users that do not run in Expert mode.
MENUFILE ECHOMEN
;
; Help Files. The echomail door allows you to set up a
; help system to inform your users of the commands
; available to them as well as information on how echomail
; works, what it's good for, etc. There are two types of
; help files:
;
; 1) the help menu. The help menu is a sort of table-of-contents
; of all of the help files
; 2) the actual help files. The help menu is simply the help
; path/prefix and the help files are the path\prefix with a
; number added on. (i.e. if the prefix was c:\binkley\echohlp)
; then help menu would be "C:\binkley\echohlp" and the help
; files would be "C:\binkley\echohlp1",
; "C:\binkley\echohlp2", etc.
;
;HelpFilePrefix - The help file path/prefix (do not include extension)
;NumHelpFiles - Number of help files (not including menu)
;
HELPFILEPREFIX ECHOHLP
NUMHELPFILES 5
;
;Sysopname - Enter one statement for each person who you wish to have access
; to the sysop conference. Each name must be enclosed in single
; quotes. For more than one sysop, enter multiple statements.
; There was a problem in prior versions of EchoDor where the
; sysop name here and that generated when running as a door could
; be different. This has been corrected.
;
;Commentname - Enter one and only one name for the person who will receive
; comments to the sysop.
;
;Commentarea - This is the area where the comments will go.
;
;NoComment - Disables the comment feature (useful for rbbs sysops)
;
SYSOPNAME 'Robert McCullough'
COMMENTNAME 'Robert McCullough'
COMMENTAREA 99
;NOCOMMENT
;
;NoIgnore - This will disable the ignore command. The ignore command is used
; to exclude certain areas from the message check. This is useful
; if you have a lot of echos in which checking all of them may take
; a very long time.
;
;NoSetNational - On Default, echodor will set everyones ignore status to
; ignore the national echos. This option will disable that.
;NOIGNORE
NOSETNATIONAL
;
;Welcome - The name of the welcome file that is to be displayed every time a
; user accesses the echomail door. The filename should be 7
; characters with no extension. A "G" or "C" will be appeneded to the
; end of the name if the user is using graphics or ansi modes. If the
; graphics version of the file does not exist, then it will default
; to the non-graphics file.
;
WELCOME ECHOWEL
;
;NODELISTPATH - This is the location of the NODELIST.IDX and the NODELIST.DAT
; files. These files are Version 6 files. The path name spec-
; ified should include a trailing backslash. If this line is
; omitted then the NODELIST.IDX and NODELIST.DAT files will be
; assumed to be in the default directory.
;
NODELISTPATH G:\Nodelist\
;
;SCANLOGNAME - This is the name of the file created by EchoDor to indicate
; the names of the echos which have new messages entered.
;
SCANLOGNAME scanlog.ctl
;
;Area table follows. Each area must be listed one per line, in the order
;you wish them to be displayed. Here is a listing of the parameters that
;must be present on the line:
;
;Num: This field is used to specify the number that will be assigned to the
; conference. Each conference should be assigned a different number. The
; area number is used to keep track of the user's last-read pointer and
; to keep track of the area membership if it is to be a private area and
; you wish to use the sigop utility. The numbers can be in any order you
; want. I usually set 1 as my main base, 2-20 as my bbs-only confernces,
; 50-55 as my local echos, and 60-100 as my echos. Do not exceed 255 for
; the number.
;
;Area tag: This is that tag that is used to identify what will be put into
; the "AREA:" statement of your message. currently, it is done by
; confmail for you, so it has no real use here.
;
;Listed tag: This tag is listed on each command line in the door. It may
; be anything you like and need not be the same as the "area tag".
; it is used simply to inform the user of which area he is in.
;
;Path: This is a dos path telling where messages for this area are to be
; stored. It should include a drive specifier and path with no trailing
; backslash (i.e. C:\binkley\messages)
;
;T: This is the type of the area and is VERY important to the door. It is used
; determine weather the area is echomail, netmail, or local. Type codes are
; as stated below:
; E - an echomail area N - The netmail area (only 1)
; B - a local message area I - An national echo area
;
;P: Determines wether or not users will be able to enter private messages into
; this area or not. It is sometimes beneficial not to allow users to enter
; mail into the echomail areas and some echomail nets will strip the private
; flag anyway.
;
;F: File transfers - this is a new feature that will soon be developed
; allowing users to upload a file, attach it to a message, and send it
; to another user. The file will be deleted after it has been sent. Thi
; option is not yet available.
;
;S: Security. This is the security level required to access the conference
; this information is retrieved from DORINFOx.DEF.
;
;WRACC: Access level required to write a message
;
;DO NOT ENTER SPACES IN ANY OF THE FIELDS. You must enter spaces to seperate
;the fields, but you cannot enter them in the middle of any field.
;
;It is usually preferable to enter the sysop areas at the end of the list in
;order to make sure the numbers in the num column of the area table area the
;same as the numbers in the desctable.
;
AREATABLE
;
;Num Area Tag Listed tag Path T P F S WRACC
;--- ----------- ------------- ----------------- - - - - -----
1 GAMING Gaming G:\CONF\GAMING B N N 1 1
2 HUMOR Jokes G:\CONF\HUMOR I N N 1 1
3 POLITICS Politics G:\CONF\POLITICS I N N 1 1
4 RBBS_DEV Rbbs-Dev G:\CONF\RBBS_DEV I N N 1 1
5 RBBS-NET Rbbs-net G:\CONF\RBBS-NET I N N 10 1
6 RBBS-SYSOP RBBS-Sysops G:\CONF\RBBS-SYS I N N 1 1
7 RBBS-PC RBBS-Pc G:\CONF\RBBS-PC I N N 1 1
8 DOORWARE Doors G:\CONF\DOORS I N N 1 1
9 DBASE dbase G:\CONF\DBASE I N N 1 1
99 PRIVATE NETMAIL G:\BINKLEY\MSGS N Y N 10 1
;
ENDAREATABLE
;
;This area contains the descriptions used for each echo area. These desc-
;riptions will be used only if there is no UserAreaList and/or SysopAreaList.
;Each description is a one line entry. The first part must be the area number.
;The number must be followed by a space. Next comes the description. The
;desciption must be less than 70 characters long. You might also want to
;include the area name in the description in case the user wants to use that
;in place of a number.
;
DESCTABLE
1 GAMING - Gamers Echo
2 HUMOR - Humor Echo
3 POLITICS - Politics Echo
4 RBBS_DEV - RBBS Development Echo
5 RBBS-NET - RBBS Net Echo
6 RBBS-SYSOP - RBBS Sysop Echo
7 RBBS-PC - RBBS-PC Users Echo
8 DOORWARE - Sysop Door Ware Echo
9 DBASE - Dbase Users Echo
99 PRIVATE - Netmail
ENDDESCTABLE
;
;UserArealist - A text file that will be output when the user seletcs
; the list areas feature.
;
;SysopAreaList - A text file that will be output when the sysop selects
; the list areas feature.
;
;Uncomment the following to use the text files instead of the desctable.
USERAREALIST USEAREA
SYSOPAREALIST SYSAREA
;
;Deleteuser - The number of days of inactivity before a user will be removed
; from the door's lastread pointer list.
;
DELETEUSER 90
;
;NodoorMode - Disables/enables certain features if you are using the door
; as your PRIMARY message system (i.e. in Scottbbs systems)
; instead of as a door. Your bbs should, when the message
; system is invoked, drop to dos and run the door in remote
; mode if you wish to have echodor as your primary message system.
; As far as I know, Today, scottbbs is the only system that
; allows this feature.
;
;Uncomment the following to run in primary message system mode
;NODOORMODE
;
; The next two options are for the download mail option. These options
;will allow your users to pack up mail in an area either To them, From them,
;Public, or all. The mail is put into a text file specified by the MAILFILE
;option. Users may download the text file from your bbs's files section
;(you should enter it into your file directory for one of the areas). You
;also wish to arcrive this into .ARC or .ZIP file to speed downloading.
;
;Mailfile - The filename (and path) of where you wish mail packed for
; download to be placed. It should be in a directory that your
; files section can access. You will also have to enter the file
; names into your bbs file directory for that area.
;
MAILFILE Usermail.txt
;
;PackMailText - This is a name of a file that is displayed to the user
; when he/she finishes packing the mail.
;
PACKMAILTEXT PackMail
;
;Nopackmail - Disables the packmail feature
;NOPACKMAIL
;
;CLOSINGSTRING - This is displayed to the user as EchoDor exits
CLOSINGSTRING 'Bye Bye Y''all'
;
;Always put "end of script" at the end of the script or you may experience
;problems.
;
End of script